GTDP3025L0412-F Desktop/External ICT/ITE Power Supply

GTDP3025L0412-F
GTDP3025L0412-F, ICT/ITE Power Supply, Desktop/External, DC-DC, , Input Rating: 9-60 VDC, Terminal Block, Output Rating: 25 Watts, Power rating with convection cooling (W) , 4V, 12VV in 0.1V increments, Approvals:GTDP3025L0412-F, ICT/ITE Power Supply, Desktop/External, DC-DC, , Input Rating: 9-60 VDC, Terminal Block, Output Rating: 25 Watts, Power rating with convection cooling (W) , 4V, 12VV in 0.1V increments, Approvals:
Information
Model NumberGTDP3025L0412-F
CE EC-Declaration for MedicalContact GlobTek for more information
CE EC-Declaration for Industrial/Commercial/ITEContact GlobTek for more information
CE EC-Declaration for HouseholdContact GlobTek for more information
UKCA-Declaration for MedicalContact GlobTek for more information
UKCA-Declaration for Industrial/Commercial/ITEContact GlobTek for more information
UKCA-Declaration for HouseholdContact GlobTek for more information
Morocco SDoC Declarationhttps://cs.globtek.info/Morocco_SDoC_Declaration?id=a0Oa000000MndWmEAJ
RoHS/RoHS3 Declarationhttps://www.globtek.com/pdf/rohs_cert/a0Oa000000MndWmEAJ
Prop 65 Statementhttps://www.globtek.com/r2/PH7CNf
REACH Declarationhttps://www.globtek.com/r2/eM2co8
Conflict Minerals Declarationhttps://www.globtek.com/r2/vZY8R5
Model Parameters
TypeDesktop/External
TechnologyDC-DC
CategoryICT/ITE Power Supply
Input Voltage Range (V)9-60 VDC
Max Input Current (A)9.0 A
Max Output Power Rating (W)25
Output Voltage Range (V)4V, 12V
EfficiencyN/A
Ingress Protection
Size (mm)110*40.60*21
EnclosureUser-added image





 
Rating Table
Model Number (Final ordering #/Part No to be defined)Voltage (V)Current (A)Power (W)RFQ
* (Final ordering #/Part No to be defined)
Specifications
A) ELECTRICAL SPECIFICATIONS:
1. Input Voltage: 9-60 Vdc
2. Output Regulation: +/- 2% measured at the output connector for 4V output
+/- 5% measured at the output connector for 12V output
3. Line Voltage Regulation: +/- 1% measured at full load for 4V output connector
+/- 5% measured at full load for 12V output connector
4. Output Ripple (Vp-p): 132mV maximum, measured at 20 MHz bandwidth with 0.1 uf ceramic capacitor in parallel with 10 uf electrolytic capacitor connected at the end of the output connector at nominal line
5. Turn-ON/OFF Overshoot: 5% maximum, 500uS typical recovery time for 25% to 50% step load
6. Turn-ON Delay: ?? Seconds, maximum @ full load, nominal line
7. Hold-Up Time: ?? typical @ nominal input voltage and full load
8. Inrush Current: ??A maximum cold start @ 9Vdc input
9. Switching Frequency: 300 KHz typical
10. Efficiency: >??% at 9Vdc full load
>??% at 12Vdc full load
>82% at 12Vdc-60Vdc full load

11. Transient Response: 500uS to +/-1.5% max value @ 25% load step

B) PROTECTION
1. Over-Voltage: ??
2. Short Circuit: Hiccup with auto recovery
3. Over-load: ??
4. Input Protection: Input line and neutral fusing
5. Reverse Polarity Protection: Available with A2S (chassis mounting)

C) SAFETY
1. Dielectric Withstand Voltage: 1600 Vdc from primary to secondary, primary to chassis, secondary to chassis


D) OTHER:
1. MTBF: 1000,000 Hours @ 25°C ambient temperature
2. Operating Temperature: -40°C to 85°C ambient temperature
3. Humidity: 5% to 95% RH non-condensing
4. Storage Temperature: -55°C to 125°C
5. Cooling: Free Convection

E) ENCLOSURE
1. Housing: Rugged, vehicle mounted. Vibration, shock, contamination, water resistant ?? . Aluminum
2. Size: 110.00*40.60*21.00 mm
3. Markings: Label
4. Vibration:MIL-STD-81F
5. Bump: SAE-J1455
6. Waterproof: ??
7. Contamination: Resistant to chemicals, rust, etc.
Derating CurveUser-added image
Qty (ea.)/Carton??
Individual Box/Gift Box Size (mm)??
Individual Box/Gift Box ColorWhite
Master Carton Size (mm)TBD
Gross Weight (kg)??
Label Width (mm)??
Label Height (mm)??
Input Configuration
DescriptionTerminal Block
Output Configuration
Common output connector options:
Click to add to your request.
L Type (Coaxial 5.5x2.5mm plug)
C Type (Coaxial 5.5x2.1mm plug)
K Type (Coaxial 3.5x1.3mm plug)
LL Type (5.5x2.5mm Locking 760k type)
CL Type (5.5x2.1mm Locking S761k type)
Magnetic Connector
L Type (Coaxial 5.5x2.5mm plug)C Type (Coaxial 5.5x2.1mm plug)K Type (Coaxial 3.5x1.3mm plug)LL Type (5.5x2.5mm Locking 760k type)CL Type (5.5x2.1mm Locking S761k type)Magnetic Connector
YL3 Type (KPPX-3P)
YL4 Type (KPPX-4P)
EJ1/2/3/4/5 (EIAJ RC-5320A type connectors)
MSB Type (Micro USB)
Custom design
YL3 Type (KPPX-3P)YL4 Type (KPPX-4P)EJ1/2/3/4/5 (EIAJ RC-5320A type connectors)MSB Type (Micro USB)Inquire for custom design

Comprehensive list of GlobTek output cordset options

Contact GlobTek for your specific requirements or custom solutions.

Approvals

Below follows a link to the latest regulatory certifications and marks for this specific product. National standards as well as certification schemes are constantly changing and so is the set of certification marks and symbols applicable to this product. Various standards, marks and symbols, and certificates are subject to change at any time without notice.

Additional standards or unique country certifications are available upon request. Please contact Globtek to request a quotation.

LogoDescription
User-added imageUKCA Certification
Request Info