Request Information Download PDF Configure Output Connector
GT-46120-12VV-x.x-Q GT-46120-12VV-x.x-Q
DOE EPS 2.0 Level VI Power Supply / Charger / AC Adapter, 12W, Available with 5-24VDC output Certified to Medical and ITE Standards
Information
Model NumberGT-46120-12VV-x.x-Q
DescriptionGT-46120-12VV-x.x-Q, ITE Power Supply, Wall Plug-in, Regulated Switchmode AC-DC, , Input Rating: 100-240V~, 50-60 Hz, Blade Options for Q Series Wall Plug-in Power Supplies, Output Rating: 12 Watts, 5-48V in 0.1V increments, Approvals: CE China RoHS Double Insulation Level VI PSE RoHS 2 Ukraine VCCI WEEE
Agency Documentshttp://www.globtek.info/certs/GT-46120-WWVV/
CE EC-Declaration for MedicalContact GlobTek for more information
CE EC-Declaration for Industrial/Commercial/ITEhttp://globtek.force.com/models/ec_declaration?id=a0Oa000000Nrw14EAB
RoHS/RoHS2 Declarationhttp://www.globtek.com/pdf/rohs_cert/a0Oa000000Nrw14EAB
REACH Declarationhttp://www.globtek.com/pdf/iso_certificates/REACH.pdf
Conflict Minerals Declarationhttp://www.globtek.com/pdf/conflict-minerals.pdf
Model Parameters
TypeWall Plug-in
TechnologyRegulated Switchmode AC-DC
CategoryITE Power Supply
Input Voltage100-240V~, 50-60 Hz
I/P Amps (A)0.6A
Wattage (W)12
Vout Range (V)5-48
EfficiencyVI
Ingress ProtectionIP52
Size (mm)64.0*40.5*31.5
EnclosureUser-added image
 
Rating Table
Model NumberVoltageAmps (A)Watts (W)RFQ
GT-46120-10055210RFQ
GT-46120-1206-0.055.95211.9RFQ
GT-46120-1212-4.57.51.339.98RFQ
GT-46120-1212-3.091.3311.97RFQ
GT-46120-121212112RFQ
GT-46120-1215150.812RFQ
GT-46120-1224-9.0150.812RFQ
GT-46120-1224240.512RFQ
GT-46120-1248480.2512RFQ
SpecificationsA) ELECTRICAL SPECIFICATIONS:

01. Input Voltage: Specified 90-264 Vac, Nameplate rated: 100-240Vac
02. Input Frequency: Specified 47-63 Hz, Nameplate rated 50-60Hz
03. Output Regulation: +/- 5% measured at the output connector
04. Line Voltage Regulation: +/- 1% typical measured at the output connector
05. Output Ripple (Vp-p): +/-1% or 150 mV whichever is greater, measured at 20 MHz bandwidth with 0.1 uf ceramic capacitor in parallel with 10 uf electrolytic capacitor connected at the end of the output connector at nominal line
06. Turn-ON/OFF Overshoot: 5% maximum, 1 mS typical recovery time for 25% step load
07. Turn-ON Delay: 1 Sec,typical
08. Hold-Up Time: 8 mS typical at nominal input voltage and full load
09. Inrush Current: 30A typical at 115VAC input ; 60A typical at 230VAC input
10. Switching Frequency: 65 KHz typical

B) PROTECTION
01. Over-Voltage: Protected Zener clamp across the output
02. Short Circuit: Protected unit will auto recover upon removal of fault
03. Input Protection: Input line fusing

C) SAFETY
01. Dielectric Withstand Voltage: 4242Vdc from primary to secondary
02. Touch Current: <0.25mA @ 240Vac input voltage

D) OTHER:
01. MTBF: 200,000 Hours @ 25°C ambient temperature
02. Operating Temperature: 0°C to 40°C ambient temperature
03. Humidity: 0% to 90% relative humidity
04. Storage Temperature: -10°C to 80°C
05. Cooling: Convection

E) ENCLOSURE
01. Housing: High impact plastic, 94V0 polycarbonate, non-vented
02. Size: 64.0*40.5*31.5 +/-1.0 mm
03. Markings: Label and/or Pad Printed and/or Molded in the case
Derating CurveUser-added image
Qty (ea.)/Carton60
Individual Box/Gift Box Size (mm)90.5*73*53
Individual Box/Gift Box ColorWhite
Master Carton Size (mm)388 x 380 x 245
Gross Weight (kg)15.4
Label Width (mm)29.8
Label Height (mm)20.8
Input Configuration
DescriptionBlade Options for Q Series Wall Plug-in Power SuppliesData Sheet: http://en.globtek.com/interchangeable-blades.php
Insertion Instructions: http://www.globtek.com/pdf/Instructions-Interchangeable-Blades.pdf
Video: Q-Blade Style Instruction Video




blades
User-added imageUser-added image
11                           12

INPUT CONNECTOR: Q-Socket (below are available blades configurations which are "not included" (unless stated above); can be purchased separately, package with power supply or as a separate "Q-KIT" if specified

01. United States / Canada / Japan  NEMA 1-15P configuration: NA 2 blades, Class II; US/CA/JP P/N: Q-NA(R)
02. Australian AS 3112 configuration: SAA 2 blade, Class II; AU P/N: Q-SAA(R)
03. UK BS 1363 configuration: UK 3 blade with dummy Ground, Class II; GB P/N: Q-UK(R)
04. European CEE 7/16 configuration: Europlug 2 pins, Class II; EU P/N: Q-EU(R)
05. Korean KS C8305 configuration: 2 pins, Class II; KR P/N: Q-KR(R)
06. Argentina IRAM 2073 configuration: 2 blades; AR P/N: Class II Q-AR(R)
07. China GB 2099 configuration: 2 blades, Class II; CN P/N:Q-CN(R)
08. India IS 1293 6A/SANS 164-3/BS546 configuration: 5A, 3 pins with Dummy Ground, Class II; IN P/N: Q-IN(R)
09. IEC320/C18 Inlet, Class II; P/N: Q-C18(R)
10. Brazilian NBR6147 configuration: 2 pins, Class II; BR P/N: Q-BR(R)
11. S. African SANS 164-1 configuration: 2 pins with Dummy Ground, Class II; SA P/N: Q-SANS164-1-16A(R)
12.  Israel / Malaysia / Singapore British Standard BS 546-15A configuration: 2 pins with Dummy Ground, Class II; P/N: Q-BS546-15A(R)

Kits

01. Q-KIT: 1,2,3,4 above
02. Q-KIT-INTL: 2,3,4 above
03. Q-KIT-6: 1,2,3,4,5,6 above
04. Q-KIT-7: 1,2,3,4,5,6,7 above
05. Q-KIT-8: 1,2,3,4,5,6,7,8 above

Output Configuration
Common output connector options:
Click to add to your request.






L Type (Coaxial 5.5x2.5mm plug) C Type (Coaxial 5.5x2.1mm plug) K Type (Coaxial 3.5x1.3mm plug) LL Type (5.5x2.5mm Locking 760k type) CL Type (5.5x2.1mm Locking S761k type) Magnetic Connector






YL3 Type (KPPX-3P) YL4 Type (KPPX-4P) EJ1/2/3/4/5 (EIAJ RC-5320A type connectors) MSB Type (Micro USB) USBC Type (USB Type C) Inquire for custom design

For a comprehensive list of options, click here

Contact GlobTek for your specific requirements or custom solutions.

Approvals
LogoDescription
User-added image  CE Certification
User-added imageCHINA SJ/T 11364-2014, China RoHS Chart: http://en.globtek.com/globtek-rohs.php
User-added image

Double Insulation - Mark is on the label or Molded in the case
User-added imageIndoor Use Only - Mark is on the label or Molded in the case
 User-added image
 
Efficiency: complies to section 301 of Energy Independence and Security Act (EISA) complies with Energy Star tier 2 (North America), ECP tier 2 (China), MEPS tier 2 (Australia), Code of Conduct (Europe)
User-added imageJAPAN TUV Rheinland-PSE GlobTek Inc to J60950-1(H26) , J55022(H22),J3000(H25).Please follow the procedure listed in the following link for proper import to Japan: http://en.globtek.com/importing-to-japan.php.
RoHS 2RoHS 2: Complies with EU 2011/65/EU and CHINA SJ/T 11363-2006 http://www.ce-mark.com/Rohs%20final.pdf
User-added imageUkraine UKRSepro (Document: www.globtek.com/html/iso_certificates/GT_Ukraine.pdf)
User-added imageJapan: Voluntary Control Council for Interference (VCCI)
 User-added imageWEEE: Complies with EU 2012/19/EU (http://ec.europa.eu/environment/waste/weee/index_en.htm) Mark is on the label or Molded in the case
Popular Products
SKUVolts OutCurrent Out (Amps)Connector
358992121Female Barrel 5.5 * 2.5 * 11mm with internal Spring Clip and Locking Notch or Equal
235147121Female Barrel 5.5 * 2.5 * 11mm with internal Spring Clip and Locking Notch or Equal
227641121RJ12, 6 Pin or Equal
358993121Female Barrel 5.5*2.1*11mm w/ Spring Clip & Locking Notch or Equal
221457121Female Barrel 5.5 * 2.5 * 11mm with internal Spring Clip and Locking Notch or Equal
255715121Female Barrel 5.5*2.1*11mm w/ Spring Clip & Locking Notch or Equal
358995240.5Female Barrel 5.5*2.1*11mm w/ Spring Clip & Locking Notch or Equal
358994240.5Female Barrel 5.5 * 2.5 * 11mm with internal Spring Clip and Locking Notch or Equal
35899152Female Barrel 5.5*2.1*11mm w/ Spring Clip & Locking Notch or Equal
35899052Female Barrel 5.5 * 2.5 * 11mm with internal Spring Clip and Locking Notch or Equal
26897752Female Barrel 5.5*2.1*9.5mm with internal Spring Clip and Locking Notch or Equal
26895052Female Barrel 5.5*2.1*11mm w/ Spring Clip & Locking Notch or Equal
22016952Female Barrel 5.5 * 2.5 * 10mm with internal Spring Clip and Locking Notch or Equal
26893652Female Barrel 5.5 * 2.5 * 10mm with internal Spring Clip and Locking Notch or Equal
2167985.952Female Barrel 5.5*2.5*9.5mm, Right Angle with internal Spring Clip & Locking Notch or Equal
2167955.952Female Barrel 5.5*2.5*9.5mm, Right Angle with internal Spring Clip & Locking Notch or Equal
2371815.952Female Barrel 5.5 * 2.5 * 11mm with internal Spring Clip and Locking Notch or Equal
358993121Female Barrel 5.5*2.1*11mm w/ Spring Clip & Locking Notch or Equal
358993121Female Barrel 5.5*2.1*11mm w/ Spring Clip & Locking Notch or Equal
358995240.5Female Barrel 5.5*2.1*11mm w/ Spring Clip & Locking Notch or Equal
35899152Female Barrel 5.5*2.1*11mm w/ Spring Clip & Locking Notch or Equal

요청 정보