GT-83047-WWVV-X.X-W3Z Wall Plug-in ICT/ITE Power Supply
GT-83047-WWVV-X.X-W3Z | |||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
GT-83047-WWVV-X.X-W3Z, ICT/ITE Power Supply, Wall Plug-in, Regulated Switchmode AC-DC Power Supply AC Adaptor, , Input Rating: 100-240V~, 50-60 Hz, NEMA 1-15P, North America Blades, Class II 2 Conductors, Output Rating: 18 Watts, Power rating with convection cooling (W) , V in 0.1V increments, Approvals: WEEE; China RoHS; RoHS; LPS; Class I; Level V; PSE; Ukraine; GOST-R; CE; | |||||||||||||||||||||||||||
Information | |||||||||||||||||||||||||||
Model Number | GT-83047-WWVV-X.X-W3Z | ||||||||||||||||||||||||||
Agency Documents | http://www.globtek.info/certs/GT-83047 | ||||||||||||||||||||||||||
CE EC-Declaration for Medical | Contact GlobTek for more information | ||||||||||||||||||||||||||
CE EC-Declaration for Industrial/Commercial/ITE | https://cs.globtek.info/ec_declaration?id=a0Oa000000JDMsdEAH | ||||||||||||||||||||||||||
CE EC-Declaration for Household | Contact GlobTek for more information | ||||||||||||||||||||||||||
UKCA-Declaration for Medical | Contact GlobTek for more information | ||||||||||||||||||||||||||
UKCA-Declaration for Industrial/Commercial/ITE | https://cs.globtek.info/ukca_declaration?id=a0Oa000000JDMsdEAH | ||||||||||||||||||||||||||
UKCA-Declaration for Household | Contact GlobTek for more information | ||||||||||||||||||||||||||
Morocco SDoC Declaration | https://cs.globtek.info/Morocco_SDoC_Declaration?id=a0Oa000000JDMsdEAH | ||||||||||||||||||||||||||
RoHS/RoHS3 Declaration | https://www.globtek.com/pdf/rohs_cert/a0Oa000000JDMsdEAH | ||||||||||||||||||||||||||
Prop 65 Statement | https://www.globtek.com/r2/PH7CNf | ||||||||||||||||||||||||||
REACH Declaration | https://www.globtek.com/r2/eM2co8 | ||||||||||||||||||||||||||
Conflict Minerals Declaration | https://www.globtek.com/r2/vZY8R5 | ||||||||||||||||||||||||||
Model Parameters | |||||||||||||||||||||||||||
Type | Wall Plug-in | ||||||||||||||||||||||||||
Technology | Regulated Switchmode AC-DC Power Supply AC Adaptor | ||||||||||||||||||||||||||
Category | ICT/ITE Power Supply | ||||||||||||||||||||||||||
Input Voltage Range (V) | 100-240V~, 50-60 Hz | ||||||||||||||||||||||||||
Max Input Current (A) | 0.8A | ||||||||||||||||||||||||||
Max Output Power Rating (W) | 18 | ||||||||||||||||||||||||||
Output Voltage Range (V) | |||||||||||||||||||||||||||
Efficiency | V | ||||||||||||||||||||||||||
Ingress Protection | Indoor Use | ||||||||||||||||||||||||||
Size (mm) | |||||||||||||||||||||||||||
Enclosure | |||||||||||||||||||||||||||
Rating Table | |||||||||||||||||||||||||||
* (Final ordering #/Part No to be defined) | |||||||||||||||||||||||||||
Specifications | |||||||||||||||||||||||||||
A) ELECTRICAL SPECIFICATIONS: 01. AC inrush current: at full load, 25°C, cold start, 115 VAC, 60Hz INPUT, 230 VAC, 50Hz input, No damage shall be occurred and the input fuse shall not be blown up 02. Output Regulation: +/- 5% measured at the output connector 03. Line Voltage Regulation: +/- 2% At nominal input voltage and full load 04. Output Ripple (Vp-p): 1At 20 MHz, and output parallel with 0.1uF && 10uF capacitors to ground, Temperature at 25℃, and nominal input voltage 05. Turn-ON/OFF Overshoot: 5% maximum, 1 mS typical recovery time for 25% to 50% step load 06. Turn-ON Delay: 3 Seconds maximum at nominal input Voltage 07. Hold-Up Time: 10ms min at nominal Input Voltage 08. RIise time:100ms maximum at nominal input voltage 09. Switching Frequency: 50 KHz typical 10. Average efficiency: 80.29% minimum B) PROTECTION 01. Over current: ≦4A with auto-recovery function 02. Over-Voltage: Electronically Protected unit will auto recover upon removal of fault 03. Short Circuit: The adapter shall not be damaged by short the DC output to Ground 04. Input Protection: Input line fusing C) SAFETY 01. Dielectric Withstand Voltage: Primary(LN) To Secondary: 3000VAC 10mA 1 minute or 4242VDC 10mA 1 minute, Primary(LN) To Ground: 1500VAC 10mA 1 minute or 2121VDC 10mA 1 minute 02. Earth Leakage Current: 3.5mA maximum, at nominal AC input voltage and frequency 03. Earth continuity test: 0.1 Ohm D) OTHER: 01. MTBF: 200,000 Hours @ 25°C ambient temperature 02. Operating Temperature: 0°C to 40°C ambient temperature 03. Humidity: 5% to 95% relative humidity 04. Storage Temperature: -20°C to 60°C 05. Cooling : Cooling shall be with natural convection cooling 06. SAFETY standard: Designed to meet UL/CUL(UL60950-1) 07. EMI standard: Designed to meet FCC (PART 15 CLASS B) E) ENCLOSURE 01. Housing: High impact plastic, 94V0 polycarbonate, non-vented 02. Size: 74.5 (L) * 36 (W) * 85 (H) mm maximum 03. Markings: Label and/or Pad Printed and/or Molded in the case 04. Weight: 200g maximum | |||||||||||||||||||||||||||
Derating Curve | |||||||||||||||||||||||||||
Qty (ea.)/Carton | 90 | ||||||||||||||||||||||||||
Individual Box/Gift Box Size (mm) | 98*54*92 | ||||||||||||||||||||||||||
Individual Box/Gift Box Color | White | ||||||||||||||||||||||||||
Master Carton Size (mm) | 510 x 345 x 308 | ||||||||||||||||||||||||||
Gross Weight (kg) | 15.6 | ||||||||||||||||||||||||||
Label Width (mm) | 38.7 | ||||||||||||||||||||||||||
Label Height (mm) | 22.3 | ||||||||||||||||||||||||||
Input Configuration | |||||||||||||||||||||||||||
Description | NEMA 1-15P, North America Blades, Class II 2 ConductorsAll NEMA 1 devices are two-wire non-grounding devices (hot-neutral) rated for 125 V maximum. NEMA 1-15P plugs have two parallel flat blades, 0.25 inches (6.35 mm) wide, 0.06 inches (1.524 mm) thick, 0.625-0.718 inches (15.875–18.256 mm) long, and spaced 0.5 inches (12.7 mm) apart. | ||||||||||||||||||||||||||
Output Configuration | |||||||||||||||||||||||||||
Common output connector options: Click to add to your request.
Comprehensive list of GlobTek output cordset options Contact GlobTek for your specific requirements or custom solutions. | |||||||||||||||||||||||||||
Approvals | |||||||||||||||||||||||||||
Below follows a link to the latest regulatory certifications and marks for this specific product. National standards as well as certification schemes are constantly changing and so is the set of certification marks and symbols applicable to this product. Various standards, marks and symbols, and certificates are subject to change at any time without notice. Additional standards or unique country certifications are available upon request. Please contact Globtek to request a quotation. | |||||||||||||||||||||||||||
|